IOTA CORPORATION LTD.
Uniform stress distribution (avoiding stress concentration) No damage to the substrate (eliminating holes, preventing thermal damage, and maintaining protective coatings) Weight reduction (thinner m......
2025-09-09IOTA RH3400C is a three-component, solvent-free silicone-modified cyanate ester adhesive with a gray-black appearance. It features a temperature resistance range of 300-400℃ and a viscosity of appr......
2025-09-08IOTA 69102 is an addition-cure one-component material integrating bonding and thermal conductivity functions. It supports screen printing and dispensing for application, and can be cured in 30 minu......
2025-09-08IOTA 69320 is a condensation-type single-component silicone thermal conductive adhesive material. It appears as a white paste, adopts titanium catalysis, and is a formic acid-releasing product. Its......
2025-09-05IOTA RH3400 is a silicone-modified cyanate ester adhesive with three components. It appears grayish-black, solvent-free, and has a viscosity of approximately 3500cp. This adhesive boasts outstand......
2025-09-04They can be divided into room-temperature curing adhesives, medium-temperature curing adhesives, and high-temperature curing adhesives. A so-called room-temperature curing adhesive refers to an adhes......
2025-09-03Chemical Bond Theory Adhesives and the surface of adherends form chemical bonds, such as covalent bonds and ionic bonds, thereby generating strong bonding force. The strength of chemic......
2025-09-02Water-based adhesives are one of the oldest types of adhesives. In ancient times, people used water-soluble polymers derived from natural substances such as bone glue and casein as adhesives......
2025-09-02Refers to the time required for an adhesive to reach a certain bonding strength after being applied. The length of curing time directly affects production efficiency. Different types of adhesives vary......
2025-09-01(I) Mechanical Theory This theory holds that the adhesive penetrates into the pores on the surface of the adherend and forms a mechanical interlock after curing, thereby generating bonding fo......
2025-09-01They can be divided into structural adhesives and non-structural adhesives. The characteristic of structural adhesives is that they can withstand large stresses regardless of the bonding pa......
2025-08-29The following factors shall be mainly considered: A. Protection performance and reliability of the board surface and components in harsh environments, such as temperature range, pressure resistance, ......
2025-08-28Against the backdrop of the rapid development of industries such as automotive electronics, photovoltaic energy, and new energy vehicles, the stable operation of core components like electronic mod......
2025-08-27It refers to the properties of adhesives related to bonding operations, including adhesive preparation, application, drying (or "open time"), curing conditions, etc. It also serves as an evaluation of......
2025-08-26Silicone rubber is currently the most widely used adhesive on the market. Silicone rubber has excellent electrical properties, along with a wide temperature range of application, good f......
2025-08-26
