IOTA CORPORATION LTD.
Structural adhesives refer to adhesives with high strength (compressive strength > 65MPa, steel-steel positive tensile bonding strength > 30MPa, shear strength > 18MPa). They can bear large l......
2025-07-24The curing reaction of adhesives is a process that achieves and improves properties such as bonding strength through chemical reactions (polymerization, cross-linking). Curing is a crucial process for......
2025-07-23On the demand side, in the wake of the unexpected incident, downstream and midstream players acknowledge the short-term uptrend. In particular, enterprises with low inventories and pre-stockpiles conc......
2025-07-22From the supply side, under the influence of force majeure factors this week, short-term supply has tightened, and an uptrend in organosilicon is already set. However, the operating rates of other ......
2025-07-22IOTA 68130 is a condensation-curing two-component thermally conductive adhesive material, which is an organic silicon thermally conductive potting adhesive. It is in a white fluid state, and the two c......
2025-07-21IOTA 69550 is an addition-curing one-component thermal conductive bonding material, featuring conv......
2025-07-21IOTA H21400 is a two-component, solvent-free adhesive in gray color. It cures at moderate temperatures with a short curing cycle: heat gradually in an oven to 170°C, hold for 2 hours, then cool wit......
2025-07-18IOTA H21500 is a polycarbosilane adhesive, which is a two-component product in gray color and contains no solvents. It adopts a medium-temperature curing method, and can be cured completely......
2025-07-17IOTA 69316 is a condensation-type one-component thermal conductive adhesive material, which belongs to silicone thermal conductive adhesive. It is easy to use and has reliable performance. It is ......
2025-07-16IOTA 69316 is a condensation-type one-component thermal conductive bonding material, belonging to silicone thermal conductive adhesive. It has reliable performance and is easy to use. It is in th......
2025-07-15Metals After surface treatment, the oxide film on metal surfaces can be easily bonded. However, due to the large difference in linear expansion coefficients between the two phases when ad......
2025-07-15IV. Silicone Adhesives In developed countries, silicone sealants are mainly used for building sealing. In the next few years, silicone sealants will also become the leading type of constructi......
2025-07-14I. Low Formaldehyde Emission Urea-Formaldehyde Adhesives As an important category of synthetic adhesives, low formaldehyde emission urea-formaldehyde adhesives account for about 30% of the to......
2025-07-14Testing the durability of adhesives is a difficult task. However, certain methods can help test the service life of adhesives, thereby determining the actual time that workpieces can remain bonded. Ex......
2025-07-11With the increasing deterioration of the global environment, people have gradually begun to use some environmentally friendly products. Although adhesives are not a large category of chemical products......
2025-07-10
