IOTA CORPORATION LTD.
On December 30th, the domestic DMC market operated steadily, with the national average price remaining at 13,600 yuan/ton, unchanged from the previous trading day. As the end of the month approached, ......
2025-12-31Still troubled by insufficient heat resistance and insulation performance of mica tapes? IOTA 3922A silicone resin specially designed for mica tapes makes a grand debut. With outstanding performance, ......
2025-12-31Adhesive joints may be subjected to the following types of mechanical stress: A) Peel stress, B) Tensile stress, C) Shear stress, D) Torsional stress. Peel stress induces high linear loading ......
2025-12-30Mica product bonding scenarios demand special substrate compatibility, high bonding strength, and stable performance—choosing the right dedicated adhesive is crucial. IOTA-61102 Mica Bonding-Specific ......
2025-12-29The forces exerted on the adhesive layer of a bonded joint under external loads can be categorized into four types: shear, tension, uneven peeling, and cleavage. A. Shear: External forces are equal i......
2025-12-29Bonding strength refers to the stress required to cause damage at or adjacent to the interface between the adhesive and the adherend in an adhesive assembly under external force, and it is also known ......
2025-12-26As industrial equipment trends toward miniaturization and high power, the dual demand for thermal conductivity and adhesion has become increasingly urgent. The IOTA-68130 two-component thermal......
2025-12-25Featuring a two-component formulation, this material forms a tough adhesive layer after curing, boasting excellent thermal conductivity and bonding strength. It enables efficient heat transfer and fir......
2025-12-24In the precision manufacturing of electronics, electrical appliances, new energy and other industries, the dual requirements for thermal conductivity and bonding are becoming increasingly stringent. I......
2025-12-23The current industrial silicon market is caught in a pattern of sluggishness on both the supply and demand sides, lacking fundamental impetus for improvement. On the supply front, production ......
2025-12-23Structural adhesives can achieve a shear strength of up to 7 MPa for bonded joints. They not only possess sufficient shear strength but also feature high uneven peel strength. Capable of withstanding ......
2025-12-22As 2025 draws to a close, falling temperatures have failed to dampen the silicone market, which continues to maintain momentum driven by multiple factors. Following the conclusion of the second emiss......
2025-12-22When observed at the submicroscopic level, the substrate surface is rough, full of pores and depressions. Liquid adhesives with good fluidity flow into and fill these pores and depressions, and form m......
2025-12-19Selective quotation suspension has emerged, with an upward trend in the silicone market on the horizon! The industry’s emission reduction initiatives are advancing steadily, and the operating rate of ......
2025-12-18Still troubled by poor heat dissipation and weak bonding of electronic components? IOTA 69316 condensation-type one-component thermal conductive adhesive material makes a grand debut, becoming the pre......
2025-12-17
