IOTA CORPORATION LTD.
This gray-black two-component solvent-free silazane adhesive features medium-temperature rapid curing, completing the process in just 2 hours at 170......
2025-06-20For general polymer adhesives, the long-term service temperature is usually below 200°C. However, in some special applications of materials, the requirement for long-term service temperature ex......
2025-06-19Silicone is currently the most widely used adhesive in the market. Silicone exhibits excellent electrical properties, along with a wide applicable temperature range, good flexibility, a......
2025-06-18Animal glues have been widely used in the furniture and wood processing industry. Common products include furniture such as chairs, tables, and cabinets, as well as models, toys, sports equipment, ......
2025-06-17Natural adhesives are commonly used adhesives in our daily lives. According to different sources, they can be divided into animal glues, plant glues, and mineral glues. Among animal glues, there are h......
2025-06-171. Bonding and Sealing for Metals, Ceramics and Composites IOTA H21600 demonstrates extraordinary adhesive force in various bonding scenarios: metal-to-metal, ceramic-to-metal, ceramic-to-cer......
2025-06-16Medium-temperature Curing, High Efficiency & Quick Operation The adhesive cures at medium temperature (only 170–200°C), significantly reducing energy consumption and equipment requirement......
2025-06-16Versatile Process Adaptability for Worry - Free Production IOTA 69102 supports two processes: stencil printing and dispensing. Whether it is a complex and precise production process or large -......
2025-06-13In the lighting manufacturing sector, heat dissipation and bonding have always been key factors affecting product performance and service life. Today, we highly recommend an excellent material that......
2025-06-12Uneven Tear Strength Uneven tear strength refers to the maximum load that a bonded joint can withstand when subjected to uneven tearing forces. Since the load is concentrated on two edges......
2025-06-111. Shear Strength Bonding strength refers to the stress required to cause failure at the interface between the adhesive and the bonded material or in the adjacent area of the adhesive part un......
2025-06-10Bonding strength refers to the stress required to cause failure at the interface between the adhesive and the bonded material or in the adjacent area of the adhesive part under external forces. It ......
2025-06-10There is no universal adhesive in the world. For different materials to be bonded, it is best to use special-purpose adhesives. If the substrate itself has low strength, there is no ne......
2025-06-09Each product has a shelf life. According to international and domestic standards, the shelf life is defined under normal temperature conditions (24°C). For acrylate adhesives, it is 20°C. ......
2025-06-09With the improvement of environmental protection and safety requirements, the demand for eco-friendly and low-VOC organic silicone adhesives has been continuously increasing. At the same time, orga......
2025-06-06
