1.Meet process requirements: Raw materials must have high content or purity so that polymerization and adhesive curing can proceed normally. Excessive impurities or moisture will affect product performance, so industrial grade one products should be used as much as possible.

2.Consider the origin: Raw materials from different sources have an impact on adhesive performance. For example, cyclohexane obtained from petroleum cracking has a lower purity, while cyclohexane obtained from benzene hydrogenation has a higher purity. Similarly, petroleum toluene has a smaller odor than tar toluene, and formaldehyde solutions produced by different manufacturers may cause different viscosities of 107 glue.

3.Pay attention to the shelf life: Chemical raw materials have a shelf life, and the performance of raw materials stored for a long time may change, especially olefin monomers and rubbers containing unsaturated bonds. It is best to use newly produced raw materials, and raw materials that are close to or exceed the storage period should be tested first.

4.Appropriate price: Under the premise of ensuring quality, choose raw materials with lower prices, and do not simply think that the more expensive the raw materials, the better.

These principles can effectively guide the selection of raw materials and ensure the stable performance and reliable quality of synthetic adhesives.

silicone adhesive products are as follows:Products-IOTA (siliconeadhesives.net)