The adhesive bonding process is crucial for bonding strength and durability. The following is a detailed process:
1.Surface treatment of 30CrMnSiA material: mechanical grinding to remove the oxide layer, cleaning with organic solvent and drying, and surface activation treatment.

2.Surface treatment of aluminum plate: the aluminum plate is anodized and sprayed with a coating with good adhesion. Clean with solvent and dry before bonding.

3.Rivet bolt and one-way valve treatment: rivets and one-way valves are anodized, and bolts are galvanized.

4.Bonding and assembly: Select a suitable structural adhesive, apply it evenly on the bonding surface, apply pressure to the position for preliminary fixation, and then rivet and screw to ensure stable connection. Finally, cure and check the bonding quality as required.

This process ensures high strength and durability of bonded parts and is suitable for aviation devices with strict bonding performance requirements.

silicone adhesive products are as follows:Products-IOTA (siliconeadhesives.net)