1. Curing temperature

   The temperature at which the adhesive reacts most violently. Adhesive curing requires a certain temperature, but the curing temperature varies depending on the type of adhesive. Temperature is the main factor of curing, which not only determines the degree of curing completion, but also determines the speed of the curing process. Properly increasing the temperature will accelerate the curing process and also increase the bonding strength.

 2. Curing time

   It refers to the time required for the adhesive to cure at a certain temperature. The length of the curing time is closely related to the curing temperature. Increasing the temperature can shorten the curing time, and lowering the temperature can appropriately extend the curing time. Whether it is room temperature curing or heating curing, sufficient curing time must be guaranteed to fully cure and obtain the maximum bonding strength.

  Curing time curve (DSC test) Gel time is an important reference data for studying the curing conditions of adhesives. It can be used as a simple and easy method to test the performance of finished adhesives and identify whether the formula is correct.

silicone adhesive products are as follows:Products-IOTA (siliconeadhesives.net)