General Knowledge of Industrial Adhesives - How to Do...
Hits: 707 img
Will refrigeration extend the shelf life of the adhesive?
Before the instant adhesive is opened, refrigeration can extend its shelf life. For extending the shelf life of anaerobic adhesive, the effect of refrigeration is not obvious. Please refer to the storage conditions on the product packaging label for specific situations.
What is the shelf life of the adhesive?
It refers to the time from the manufacturing date of the product to its expiration. The shelf life varies for different products and models. For more information, please contact us.
How much adhesive do I need?
Just enough to fill the bonding area is sufficient. Excess glue will be a waste and may overflow, making it difficult to clean up. Automatic gluing equipment can control the continuous use of the adhesive on the production line. How many drops are there in each tube, each bottle, per liter, or per pound? It depends on the flow rate of the liquid.
How can I accelerate the curing speed of the silicone grease RTV sealant?
The curing speed of the room-temperature-curing adhesive depends on the changes in room temperature and humidity. The higher the temperature and the greater the humidity, the faster the curing speed. The curing proceeds from the surface to the inside. Approximately within 24 hours, a 2MM-thick part will turn into a rubber solid. The thicker the sealed part, the longer the curing time. Appropriate heating can shorten the curing time.
Can silicone gel be used on paint?
Most adhesives can be used on the surface of dry paint, but paint cannot be applied on the surface of the adhesive.
What does RTV mean?
RTV is the abbreviation of Room Temperature Vulcanize, which means room temperature vulcanization (curing).
Can you change the adhesive strength or other properties to suit our application?
We have many adhesives with different bonding strengths, and these products can meet many requirements.
Do you have conductive adhesives?
We have adhesives that are thermally conductive and electrically conductive.
What is the difference between potting and encapsulation?
Potting refers to embedding an electronic component in a container filled with insulating or protective materials. Encapsulation is a more commonly used term, which means covering, sheathing, or protecting, as if placing it in a capsule.
How can I prevent the glue from flowing out of the bonding area?
Select the appropriate viscosity and use the correct application method. Thixotropic adhesives can also prevent the glue from flowing.
What will happen to your adhesives at low temperatures?
Most products can maintain good performance at very low temperatures to provide better protection. For example, silicone products can maintain excellent elasticity at temperatures as low as minus 30 degrees Celsius or even lower.
