1、 The surface of the adhered object should be clean and free of oil stains and debris
2、 Selection of Light Source and Light Curing Method
The higher the temperature on the surface of the bonded object, the faster the curing speed.
3、 The ideal adhesive layer thickness for bonding is 0.01-0.05mm
Being too thin or too thick can affect the bonding performance. Ensure that the adhesive layer absorbs sufficient ultraviolet energy to achieve good curing effect, otherwise it may affect the adhesive performance of the adhesive layer.
4、 The closer the distance, the faster the curing speed
Relevant tests should be conducted based on the local natural environment and available conditions, as well as the proficiency of construction personnel, in order to determine the operating procedures

silicone adhesive products are as follows:Products-IOTA (siliconeadhesives.net)